HOW TO UPGRADE ORION DNA GO TO ORION PLUS?
GET YOUR ORION PLUS IN 12 STEPS, 5 MINUTES
(*Only compatible with Windows System)
Please take down the pod before the upgrade.
Step 1 – Download the Upgrade Software
Step 2 – UnZip the file you downloaded(*zip) and open;
Step 3 – Install SetupEScribe2_INTL_SP19;
p1. Software file
p2.Install SP19
Step 4 – Then double click on the SP20 and upgrade to the Version 2.0 SP20.
p3.Software SP20
p4.Upgrade to SP20
Step 5 – Make sure the software installed is the V2.0 SP20.
Open the software installed, Choose “Help-About EScribe”.
p5. V2.0 SP20 EScribe
Step 6 – Choose language.
p6. Choose language
Step 7 – When connecting to USB, the connection will be prompted, click ok
(Tips:If there’s no prompt when you connect the second time, select Evolv DNA GO at the bottom.)
p7. SP20
Step 8 – Choose “Tools – Production Utility”.
p8. Tools – Production Utility
Step 9 – Log in your EScribe account or Regist.
Or log in the account we provided:
Account: info@hipbar.net
Password:lostvape
p9.Log in
Step 10 – Click browse and select the firmware and files to upgrade.
p10. Browse and Select from “Firmware&settings” File
Firmware & settings
Choose Firmware & Setting files from the zip files you downloaded.
p11. Files’ position
p12. Firmware files
p13. Settings files
Step 11 – Please cancel the “Fire test” and “Battery test”.
p14. Cancel the “Fire test” and “Battery test”
Step 12 – Click “Program&Test”button and start upgrade.
p15. Click “Program&Test” and finish
When the device flashes green light, the upgrade is successful.
(Tips:Do not touch the USB cable during the upgrade process.)
p16. 5 power levels
Problems while upgrade?
Send an email to info@hipbar.net with the heading “Upgrade Problem” and we’ll get back to you in three work days.